Sensors
Rain
Irritrol Wireless Rain Sensor Plus | RS1000
- Wireless Models: Require less labor for the installer
- Constant Communication Between Transmitter and Reciever: Assures that even after a controller power outage, the controller is continually updated with the sensor’s “wet” or “dry” status
- Versitile Mounting Options: Requires no special tools – Quick-Clip™ gutter bracket and ½” conduit adapter included
- Signal Strength Indicator: Ensures correct installation, communication link and signal integrity (wireless models)
- Smart Bypass for Easy System Override: Allows for temporary deactivation while automatically resetting on next activation (wireless models)
- Fully Adjustable Shutoff Points: From 1⁄8″ to 3⁄4″ of accumulated rainfall
- Dry-Out Rate Adjustment For Reset Delay: Allows for setting the ideal dryout time
- Patented Wirelss Technology: Unsurpassed by the competition.
Flow
The HC flow meter now accommodates additional ranges. The flow meter designed for the U.S. now has four options covering ¾”, 1″, 1½”, and 2″, all with NPT threads and an on-meter, dial-type gauge that displays readings in U.S. gallons.
- Compatible with HC, HPC, Pro-HC, and HCC
- Provides station-level flow totals
- Sends automatic alerts in the event of high-flow, low-flow, or unscheduled flow conditions
- Flow reports within Hydrawise software can display total system water use and individual station water use for accurate water budgeting and tracking
- Robust brass construction with union fittings for easy installation and removal for winterization
- Analog dial on the face of the meter displays daily flow totals and a leak detector
Soil
Hunter Soil-Clik
The Soil-Clik simplifies soil moisture sensing. The Soil-Clik probe uses proven technology to measure moisture within the root zone. When the probe senses that the soil has reached its desired moisture level, it will shut down irrigation, preventing water waste.
Soil-Clik has two components: A moisture sensor probe, which is placed in the soil, and an electronic module, which communicates with the probe and the controller. The probe is easy to install—simply bury it to the correct root depth for your plant material. It can be placed up to 1000 feet from the controller. Easy push button operation allows adjustments to the desired moisture level, with an immediate update of actual measurements.
The module attaches to all AC-powered Hunter controllers and will work with most other manufacturers’ AC-powered controllers. Soil-Clik can be programmed to shut down irrigation when it senses adequate moisture.
Soil moisture level and status at a glance
- Shuts down irrigation when desired moisture level has been reached
- One-touch override allows soil moisture bypass for special conditions
- Low voltage outdoor enclosure powered by host controller
- Simple installation allows probe to be up to 1000 ft. from controller
- Connect to Hunter sensor inputs, or use to interrupt common wires in virtually any 24 VAC irrigation system
- Use with X-Core®, Pro-C® and I-Core®, and ACC Clik sensor inputs
- Ideal companion sensor to Solar Sync®
Contact Me
Whether you have questions about irrigation techniques, need personalized advice, want to provide feedback, or are interested in exploring collaboration opportunities, I’m here to assist you. Your inquiries and ideas are highly valued. Looking forward to hearing from you!